Where is the best Soft PVC refrigerator magnet?

Yuheng PVC refrigerator magnet manufacturer teaches you to choose:

1. First look at the zhipvc refrigerator paste. After the product dao comes out of the oven and cools down, fold it slightly. If it cracks, it means it is not cooked.

2. Second, color and position. According to the customer's sample, see if the color and position of the product we produce are consistent with the sample.

3. Check whether the bottom of the PVC refrigerator sticker is flat, and there should be no air bubbles in the place where the magnet on the back of the product cannot be attached.

4. Look again at the quality of PVC refrigerator stickers. It mainly depends on whether the product has bubbles, impurities, and color mixing.

The operation steps of embossed refrigerator magnet:

1. Prepare the necessary equipment and utensils such as weighing equipment, work tools, glue adjusting equipment, drying equipment, and the work to be glued in place.

2. Put the agitated AB mixed glue into a soft plastic bottle with a sharp spout for dispensing.

3. The glue area is slightly larger or the quantity of glue is larger. To accelerate the elimination of bubbles in the glue, a fire using liquefied gas as fuel can be used to accelerate the defoaming. When defoaming, the flame of the fire should be adjusted to a complete combustion state. , And the flame should be kept at a distance of about 25cm from the surface of the work object, and the walking speed of the fire can not be too fast or too slow, just keep a proper speed.

4. After the bubbles are completely eliminated, the work can be moved into the oven in a horizontal manner to heat and solidify. The temperature should be baked at about 40℃ for 30 minutes and then raised to 60℃-70℃ until the glue is completely solidified.