How To Clean The Pvc Keychain Pendant Without Damage?

The pvc keychain is a common type of keychain pendant, which is beautifully made and durable by consumers. What if the pvc rubber keychain pendant is dirty? How should it be cleaned?

There is a very simple method, is to use a cloth with wind oil essence, the effect is very good, can effectively remove the stains on the keychain, but also will not let the keychain scratch and aging.

Vinegar dipping method: if there is not much rust on the key, just some sporadic surface rust, you can soak the rust in vinegar to make it loose and not too firm, and then wipe it off with a rag. Soak it for half an hour to an hour, and the amount of vinegar used will allow the solution to soak through completely.

Wire sanding: this method is good for rust on keys, and when brushing the pan, sand the keys with a wire soaked in water and continuously rinse off the sanded rust with water. Bill and most of the rust was removed, then soaked in vinegar and dried with a rag.

Nail File: A nail file, a piece of iron with a cross grain, is usually supplied with the nail cutter, and will serve to polish it, and this method is also used in cases where there is a lot of rust, and some other keys are cross-shaped and can only be polished with a file. Use the end of the nail file and then rub a few times on the grooves of the key and the rust will fall off.

Sanding iron sand: in the hardware store to sell iron sand, iron sand is an important material to remove rust, than with a file to polish the effect is better, more lubrication, and will not affect the shape of the key, with a file to polish is easy to form a key deformation, and finally can not open the lock. The method of use is to use iron sandpaper folded up, the key in the iron sandpaper between the two layers, and then back and forth scrubbing.