Why Choose Pvc?

The main advantages of PVC materials are

Lighter in materials, waterproof and moisture-proof. Unlike the plastics we often find on the day, PVC also has the characteristics of flame retardant and heat insulation.

PVC material has stable physicochemical properties, is insoluble in water, alcohol, gasoline, gas, water vapor leakage is low; at room temperature can withstand any concentration of hydrochloric acid, less than 90% sulfuric acid, 50-60% nitric acid and 20% The following caustic soda solution has a certain chemical resistance; it is quite stable to salts, but is soluble in organic solvents such as ethers, ketones, chlorinated aliphatic hydrocarbons and aromatic hydrocarbons.

Feature

Excellent mechanical properties, excellent electrical properties, strong acid and alkali resistance, good chemical stability, but low softening point. Suitable for making thin plates, wire and cable insulation, seals, etc.

Feature

1. Amorphous material, low moisture absorption, poor fluidity. In order to improve fluidity and prevent bubbles, the plastic can be pre-dried. The mold casting system should be short and thick, the gate section should be large, and there should be no dead angle. The mold must be cooled and the surface should be chrome-plated;

2. Due to its corrosive and fluid characteristics, it is best to use special equipment and molds. All products must be added with different types and amounts of additives as needed;

3. It is easy to decompose. It is more easily decomposed with steel and copper at 200 °C, and it escapes corrosion when decomposed. Irritant gas. The molding temperature range is small;

4. When using the screw injection machine nozzle, the hole diameter should be large to prevent dead angle stagnation. Good without inserts, if there are inserts should be preheated.