What are the production processes of silicone protective sleeves?

The following is the expertise on the production process of silicone sleeves:

1. The configuration of silicone raw materials, which includes raw rubber compounding, color tone regulations, raw material weight calculation and other work responsibilities.

2. Heat up the mold, put the cut plastic sheet into the mold, and then let the product heat up the vulcanized rubber, so that there is a basic finished product.

3. The product is pressed edge, multi-purpose silicone protective cover, the product will have burrs after molding, and it is basically a complete product after trimming the burrs.

4. The process of printing logo, silk screen ink is to enhance some pattern design or brand logo for the surface of the silicone sleeve, which is convenient for customers to operate the function, and at the same time, it can also improve the appearance and three-dimensionality of the product.

In the production factory of multi-purpose silicone protective covers, color differences may occur when producing colored silicone products, and strength errors are likely to occur during rubber mixing. During production, there may also be shortages of materials, dry materials, and hemp materials. .

The silicone product itself is very easy to get ash, so when producing various silicone sleeves, it is generally sprayed with hand-feeling oil, and before spraying the hand-feeling oil, it is necessary to check whether the product is completely clean. Therefore, it must be sprayed once and then dried by infrared rays. On the other side of the spray, a multi-purpose silicone protective cover, processed in the drying process.